This machine was used high-quality imported and domestic parts, Designed and made by professional engineers and technicians with advanced technology. This machine has simple operation, low failure rate, etc.

Pls read manual carefully before using this machine. Any question, please contact our company, we will provide technical support and guidance immediately.

Our company has the right to modify the equipment appearance and technical parameters, and without special noticefication.

Machine function and application

This machine fill and seal ointment, cream jellies,toothpaste, lotion,jam and viscosity material, sealing or tail folding, batch number embossing (include manufacture date) automatically. It's ideal equipment for aluminum tube, plastic tube and laminated tube , this machine can fill plastic tube or aluminum tube, no need to change the plastic tube mold or aluminum tube mold, so it is easy for customer who has both palstic tube and aluminum tube. it can save time and avoid any mistake when you change plastic tube mold to aluminum tube mold. this machine is morden technology.

1. Use ultrasonic to weld plastic soft tube tail. Do not need any adhesive or filler or solvent when welding, do not consume large amounts of heat, and easy to operate, high welding speed, high efficiency.
2. This machine is widely used in toothpaste, cosmetic, medical product, food and industrial tubes etc.

ప్రధాన లక్షణాలు

1) use high-quality imported and domestic parts.
2)Designed and made by professional engineers and technicians with advanced technology.
3) simple operation, low failure rate, etc.

Operation process

1. Connect power and compressed air correctly (suggest 0.5MPa).
2. Press the Power switch
3. In the manual : Put tube on the holder, press Feeding cylinder start send the tube holder into the mould,
4. Put tube on the holder.
5. Press 'Ultrasonic cylinder start', front mould and back mould will be closed. set 'Moulds gap adjustment', let two moulds just touch and no gap. Press 'Cutter controller' and confirm the cutter will work smoothly.(need to put the plastic tube on the tube holder when you adjusting)
6. Set front mould and back mould and cutter at original position.
7. Put tube on the 'Holder' and press 'Feeding cylinder start', the tube will run between two moulds. Adjust the height of holder if necessary. (suggest tube is higher than back mould 2 to 3 mm)
8. Make tube back to original position.
9. Set to auto status, turn on sensor if tube has color code otherwise turn off it.
10. Press 'Auto' the machine will work automatically.

త్వరిత వివరాలు

రకం: ఫిల్లింగ్ మెషిన్
పరిస్థితి: న్యూ
Application: Beverage, Medical, Chemical, Machinery & Hardware
ప్యాకేజింగ్ రకం: కేస్
ప్యాకేజింగ్ మెటీరియల్: వుడ్
స్వయంచాలక గ్రేడ్: సెమీ ఆటోమేటిక్
Driven Type: ultrasonic
Voltage: AC220V 50/60HZ singe phase
Power: 2kw
Dimension(L*W*H): 850*900*1650mm
Weight: 180kgs
Certification: ISO and CE
Name: semi automatic filling machine
Filling material: Flowing Liquid
ఫంక్షన్: ఫోర్జింగ్ సీలింగ్ ఫిల్లింగ్
Filling Range: 2-50ml 10-150ml 30-300ml 50-500ml 100-1000ml
Sealing Diamension: 5-50mm
Max.height: 5-250mm
Capacity: 8-15tubes/min
Machine Body: 304# stainless steel
Mark sensor: Panasonic (Japan)
Air cylinde: AirTac (Taiwan)
విక్రయాల తరువాత అందించబడిన సర్వీస్: ఇంజనీర్లు విదేశాలకు సేవ యంత్రాలకు అందుబాటులో ఉన్నాయి


Tube Filling and Sealing Machine is designed for Al tube, plastic tube and laminated tube filling and sealing for cosmetic, pharmacy, foodstuff and bond industries. Its working principle is:

The tubes in tube chamber vertically enter into the first-station tube holder one by one, and transferred together with the rotating turn plate to the second-station for I. Marking detection. The third station is for tube locating and reversal inspection (nitrogen jet tubes cleaning is optional). The material filling is in the fourth station and then come to the sealing(and tail bending) station for heating (PE tube) folding (metal tube), tail sealing (PE), clamping (metal), batch number printing, cooling, cutting and at last finished products discharging. Every tube should go through the whole procedure and then finished after filling and sealing.

The main structure of the machine is consisted of main transmission, feeding, rotation, tail sealing, filling and electricity control system.


With 9 stations and matching with manipulator, the machine is able to meet different type of tail folding, sealing requirements of aluminum tube, plastic tube and laminated tubes. It is a multi-purpose machine.

The whole procedure of tube feeding, I. marking, tube interior cleaning (optional), material filling, sealing (tail folding), batch number printing, finished products discharging can be performed automatically.

Servo control makes it precise and convenient to adjust the filling amount by touch screen.

According to the different length of the tube, height of tube chamber can be adjusted easily by motor. With external reversal feeding system, makes tube charging more convenient and tidy.

The mechanical linkage photo sensor precision tolerance is less than 0.2mm. The chromatic aberration scope between tube and I. mark is reduced.

Photo-electronic, electric, pneumatic integrative control is applied with the machine. No tube, no filling. It gives an alarm when low pressure occurs. The machine stops automatically if tube error or open the safety door.

Three-layer jacket instant heater with inside air heating, it won't damage the pattern on outer wall of tube and achieves firm and beautiful sealing effect.

The machine has a manipulator of five-fold and three-fold function and can achieve double-sides code print that greatly improves the product quality and the grade of machine.

High-grade liquid crystal display controller matching with buttons for operation that can easily control the stepless speed regulator, parameter setting, constant statistic, pressure instruction and trouble display. The operation is simple and reasonable.

Order requirement:

How much speed do you need?
What tubes do you want to fill? Plastic tube? Aluminium tube? Laminated tube?
What size of the tube? Diameter? Length?
How much capacity do you want to fill?
What is your raw material?
Do you need chiller if it is plastic tube?
What is the voltage? Is it 380V 50hz 3phase?
When do you need ?

సంబంధిత ఉత్పత్తులు